b'Architectural Sheet Metaljoints. It worked great! Photo 7 their shop that canweldand solder and can fabricatethis flashing, that is a really big deal. Photo 8Photo 8Photo 7SummaryDead Valley Conditions:Dont be afraid to think outside the box to come up with Lastly, the condition that is most likely to cause problems on asolutionstofixproblems.Withcarefulplanningand metal roof is where you have a dead valley condition or whereinstallation, theres no need to fear valley conditions.During a valley from a dormer terminates into the field of the roof.project design, it is critical to consider the roof assembly, This is a condition that is very difficult to get right and keepbuilding geometry, panel attachment and points of fixity for watertight. After many years of dealing with this issue, I believeall valley conditions.And remember, if youre ever unsure, the best way is to terminate the valley onto a one-piece, weldedalways reach out to your manufacturer of choice to gain their or soldered stainless steel or aluminum transition flashing thatinput and recommendations.carries the water from the end of a dead valley into the field of the roof, This type of detail separates the great roofers from the good roofers and one of the things I look for when trying to find new contractors to work with. If they have a guy in MIDWEST ROOFING CONTRACTORS ASSOCIATIONCERTIFIED ROOFING TORCH APPLICATOR TRAINING DELIVERED TO YOUSCHEDULE YOUR CERTA TRAINING SESSION TODAY!Questions? Call the CERTA line (937) 206-2132 or email: CERTA.Info@mrca.orgScan with your phone'